Playing Back An Event Using The Editor - Compulite Sabre User Manual

Example: In the editor, assign Event 3 to memory 10.
Keypresses
1. Go to the Event menu.
2. Enter the Event number for
assignment.
3. Press F3 Assign to mem #
4. Press [STORE]
¾ ¾
Note
[AUTO ASSIGN] must be active (LED on) to operate Events sequencing on the A/B
crossfader.
Erasing an Event from a memory
Example: Erase Event 3 from memory 10.
Keypresses
1. Select memory 10.
2. Press [EVENT]
3. Press [ERASE]

Playing back an Event using the editor

Events can be operated in the editor.
Keypresses
1. Press [EVENT]
2. Enter the Event number on
the numeric keypad.
3. Press [ENTER]
Sabre
Playing Back Events
Results/Comments
Sabre prompts for an Event number.
Event 3 is assigned to memory 10 and is thus
displayed on the Memory List.
Results/Comments
The Event assignment for memory 10 is
erased.
Results/Comments
Event appears in the command line.
The Event is initiated.
24-15