Table of Contents
Advertisement
Key
[GO TO] (A/B)
[GO TO] (C/D)
[GOBO]
[GROUP]
[HARD]
[HELP]
[HOLD] (A/B)
[HOLD] (C/D)
[HOLD XF]
[HOME]
[ I ]
[IGNITE]
[IRIS]
[JOIN]
[LATCH]
[LEADER]
What it does
Interrupt a crossfade in progress on the A/B crossfader and
immediately initiate a fade to the next memory in the sequence or
to a memory selected in the editor.
Interrupt a crossfade in progress on the C/D crossfader and
immediately initiate a fade to the next memory in the sequence or
to a memory selected in the editor.
Program, access, and erase Gobo Libraries on the Numeric Soft
Keys.
Program, access, and erase Groups on the Numeric Soft Keys.
Assign chasers and Q-Lists to run in Hard run mode on the
controllers.
Open the on-line Help window. After opening the Help window
press any key that you need information on. Press again to exit.
Halt the crossfade in progress on the A/B crossfader.
Halt the crossfade in progress on the C/D crossfader.
The XF controller assignment mode crossfades between current
stage output and the parameter values of the controller assignment.
If there is an assignment on the controller the LED is on. To
temporarily blackout the output from the controller, press this key.
To return the output, press again.
Hold chasers and Q-Lists running on controllers.
Assign Home values to all parameters in the selected spots. Home
values can be edited in the Mix Output menu/Define Device/Edit
Init. [CL1] and [CL2] reference the Home values.
Switch to the I (Intensity) wheel bank.
Send ignition codes for devices that require it to turn the lamp on,
turn the lamp off, reset the device, and for fan control.
Select spots' Iris parameter.
Assign intensity on the numeric keypad or use the Iris wheel.
When selected (LED on) the wheel addresses the Iris.
Link chasers to respond simultaneously to a single Go or Hold
command.
Change the Bump Buttons to on/off buttons.
Designate one spot as Leader and the other spots as followers. The
Leader 'masters' the x/y parameters of all the follower spots.
Enable/disable the Leader function.
View the Leader assignment display.
B-7
Sabre
Advertisement
Table of Contents
