Compulite Sabre User Manual page 149

11-16 Loading show files
Loading to a selected Q-List
You can load all the memories from a QList, a selected range of memories from a Q-List,
or a range of Q-Lists while renaming the Q-Lists.
Example: Load Q-Lists 1 – 6 as Q-Lists 91 – 96. The default Q-List is 1.
Keypresses
1. Enter the Load menu.
2. Go to the correct drive or
directory.
3. Press F1 Play/Act
4. Enter the show file number.
5. Press F4 From QList
6. Press F2 Thru Q list #
7. Enter 6 on the numeric keypad.
8. Press F1 Start at Q list #
9. Enter 91 on the numeric keypad.
10. Press F1 Load
11. Press F1 Yes
Example: Load a range of memories from Q-List 1 as Q-List 21
Keypresses
1. Enter the Load menu.
2. Go to the correct drive or
directory.
3. Press F1 Play/Act
4. Enter the show file using the
numeric keypad.
5. Press F4 From QList
6. Press F3 Mem # and enter the
first memory of the range.
7. Press F2 Mem # and enter the
last memory of the range.
8. Press F1 To Q list #
9. For this example, enter 21 on the
numeric keypad.
10. Press F1 Load
11. Press F1 Yes
Sabre
Results/Comments
Sabre prompts for the show file.
Sabre automatically enters the default Q
List number.
Sabre prompts for the target Q-List.
The message Are you Sure? is displayed.
All of the memories in Q List 1 – 6 are
loaded to Q Lists 91 – 96.
Results/Comments
Sabre prompts for the show file.
Sabre automatically enters the default Q
List number.
Sabre prompts for the target Q-List.
The message Are you Sure? is displayed.
All of the memories in Q List 1 – 6 are
loaded to Q Lists 91 – 96.