Table of Contents
Advertisement
Applying delta tracking from the source memory
Keypresses
1. Press [MEMORY]
2. Press [→]
3. Press [DELTA]
4. Press [STORE]
Applying delta tracking beginning from a selected memory
Example: The Delta was created when modifying memory 1. You want to apply the Delta
tracking starting from memory 30.
Keypresses
1. Select memory 30
2. Press [→]
3. Press [DELTA]
4. Press [STORE]
Results/Comments
Delta tracking begins from the memory in which a
Delta was created. If you select a memory
number, at this point, the Delta tracking begins
from the memory you have selected.
Denotes an unspecified memory range. Tracking
is applied from the source memory to the last
memory.
Track appears in the command line.
Sabre begins tracking through all memories,
applying the changes as determined by the Delta.
If there are a lot of memories to track through, a
Wait message may be displayed. When the Delta
tracking modification is complete, the range of
memories modified is displayed.
Results/Comments
Delta tracking will begin from memory 30.
Track appears in the command line.
Sabre begins tracking through all memories,
applying the changes as determined by the Delta.
If there are a lot of memories to track through, a
WAIT message may be displayed. When the
Delta tracking modification is complete, the range
of memories modified is displayed.
Delta
8-9
Sabre
Advertisement
Table of Contents
