Compulite Sabre User Manual page 241

A Primitive can be assigned at any point during Effect programming. You may find that
you want to adjust the Base, assign Offset, and Rate values before assigning a Primitive.
Keypresses
1. Select spots.
2. Select a parameter.
3. Assign a value
4. Press [EFFECT]
5. Use the Iris wheel to select a
Primitive.
Releasing a Primitive assignment
Example: Release the Primitive assignment on Spot 5, Y.
Keypresses
1. Select spot 5 and press [Y]
2. Press [EFFECT]
3. Press [RELEASE]
Effect Attributes
Results/Comments
The Effect Editor is active and displayed on
monitor 1. Effect attributes appear on the LCD
displays.
The Effect operates immediately on selection
of a Primitive.
Results/Comments
The Effect Editor is active and displayed on
monitor 1. Effect attributes appear on the LCD
displays.
The Primitive assignment is released from the
selected parameter.
20-5
Sabre