Compulite Sabre User Manual page 342

Assigning parameters to wheel banks
The parameters are further organized into wheel banks.
Wheel Banks Examples of Parameter Assignments
I - Intensity Dimmer, Iris, Frost
F - Focus Pan, Tilt
C - Color All color parameters, such as magenta, cyan, yellow, and color
wheels. Also related parameters, such as color spin.
B - Beam All gobo parameters, prisms, and related parameters, such as gobo
spin, and rotation rates.
1 & 2 Sabre contains 2 extra wheel banks for your convenience.
It is not allowed to assign more than 1 parameter per wheel to the same wheel bank.
Example: If the group of parameters assigned to wheel 1 are magenta, cyan yellow, and
the color wheel, only 1 of these parameters can be assigned to bank C (color). To assign
all of these parameters to wheel bank C, they must be assigned to different parameter
wheels.
Example: Assign parameters yl, cy, mg to wheel bank C. Assign parameters gb and fc to
wheel bank B.
Keypresses
1. Press F1 Bank Set Up
2. Press [C]
3. Press the parameter keys for
yl, cy, mg
4. Press [B]
5. Press the parameter keys for
gb and fc.
6. When you have completed
all the parameter to bank
assignments, press F1 Store
Mix Output Menu
Results/Comments
The Wheel Banks set up is displayed.
If there are assignments to bank C, the bank
you are now editing is displayed in yellow on a
red field.
The wheel bank assignment is displayed in
white.
If there are assignments to bank B, the bank
you are now editing is displayed in yellow on a
red field.
The wheel bank assignment is displayed in
white.
When a wheel bank is selected during editing,
the parameters assigned to that wheel bank
are immediately selected.
27-15
Sabre