Table of Contents
Advertisement
13-4
Controller Displays
The X-Fade display contains an expanded controller display. It basically looks like this:
controller #
17
type of
grp
assignment
Pr80# 10 FL
Figure 2 Controllers in XFade Display
Type of Assignments
Group of spots and/or channels
Memory
Chasers
Soft Chaser
Hard Chaser
Q List
Parameter
Sabre
soft chaser fade
progression
assignment
Xfade
mode
controller
level indicator
fader level
position in
priority stack
priority code
What is displayed?
grp
The memory number.
If the assignment was through the [DIM] key, the
memory number appears in red. If the assignment was
through the [X-FADE] key, the memory number
appears in gray when at 0%.
The assigned memory range.
When the chasers are running or on hold, the
assignment appears in red.
The run mode and the chase rate.
Cs followed by "stairs"
The assigned memory loop or range.
The display is dynamic if the chaser is running.
Ch followed by →→
The first memory of the assigned loop or memory range.
The display is dynamic if the chaser is running.
Qh denotes a hard run Q List assignment.
Qs, denotes a soft run mode assignment.
The display is dynamic if the Q List is running.
The moving light's short name and the parameter name.
Advertisement
Table of Contents
