Table of Contents
Advertisement
15-8
Working with LTP
Changing the priority stack during playback
You may want to bump a playback device to the head of the priority stack. When you
bump a playback device to the top of the priority stack it becomes immediately active.
This function can only be used on playback devices that have the same priority code.
Example: Spot 1 is active on A, controller 1, and controller 20. The priority stack is:
current output is controlled by controller 1, next in line is controller 20, and then crossfade
A. You want A to the active output. You can bump A to the top of the priority stack. The
rest of the priority stack is updated also.
PLAYBACK
DEVICE
Controller 1
Controller 20
Crossfader A
Bumping A/B or C/D to top priority
This action does not initiate a crossfade on A/B; A/B is bumped to the top of the priority
stack. The assignment on A/B is immediately active on stage.
Keypresses
1. Press [SHIFT] [GO]
Bumping a controller to first priority
Keypresses
1. Press
[SHIFT] and a [Bump
Button]
Sabre
CURRENT
PRIORITY STACK
1
2
3
Results/Comments
The assignment on A/B or C/D is immediately
active.
Results/Comments
The controller assignment is immediately
active.
UPDATED PRIORITY
STACK AFTER BUMP
2
3
1
Advertisement
Table of Contents
