Compulite Sabre User Manual page 348

Erasing a device
Devices can be erased from the User Pool. To erase devices from the device list, see page
27-14
Keypresses
1. Press F4 Device Pool
2. Press F1 Get From User's
Pool
3. Use the arrow keys to
highlight a device.
4. Press F5 Erase Device
Adding a new device to a show
Example: You are working on show 2. There is a device that appears in the Device List for
show 1 that you want to add to the Device List in show 2.
Keypresses
1. Make sure you show (show 2
as per the example) is
recorded.
2. Load Mix Device Only from
show 1.
3. Go to Mix Output menu.
4. Put the new device in the
User's Pool (see above).
5. Load Mix Device only from
show 2.
6. Add the new device in the
User's pool to the Device
List.
Mix Output Menu
Results/Comments
If the system pool is not displayed, press [UP
1] or [DOWN 1].
The selected device is deleted.
Results/Comments
The current Device List is changed according
to the Device List just loaded from show 1.
The original Device List for show 2 is
restored.
27-21
Sabre