Table of Contents
Advertisement
27-12
Mix Output Menu
Defining other parameter attributes
Attribute
What it does
This provides the option of inverting a parameter.
I (invert)
Example: When the parameter value for the iris is at 0% the iris is fully
open. When the parameter value is FL the iris is closed. Defining the
parameter as inverted results in the iris being open when the parameter
value is FL and closed when the parameter value is 0.
X (crossfade)
Choose between the parameter jumping in the crossfade or fading in the
crossfade.
L (library)
Parameters that are normally included (see the library reference display)
in libraries may be excluded.
Keypresses
1. Move the cursor to one of the
columns described above.
2. Use [+] or [] according to
instructions.
Ignition
Many moving lights have a control channel to strike the lamp, extinguish the lamp, reset
the device, and control the fans. This control channel is the channel addressed when
selecting the ignite function.
The Ignite parameter is definable for DMX512 controlled spots only. The Ignition
definitions for L-Mix or S-Mix devices are not programmable.
As with all device definitions, consult the manufacturers' specifications.
See Chapter 5 Selecting and Editing Spots for instructions on igniting spots.
Continuous ignition definitions for DMX spots
If the ignite channel is continuous, there are 3 possibilities:
1. DMX is set at 99
2. DMX is set to control channel according to specifications and time is set to 99.
3. DMX is set to control channel according to specifications and time is set to any value
except 99.
Example 1: DMX set at 99. Superscan Zoom uses the ignition definition.
Contr
DMX
ignite
99
Sabre
Results/Comments
A window opens with instructions for
determining the attribute setting.
Time
Value
6
0
Advertisement
Table of Contents
