NEC Univerge SV8100 Features And Specifications Manual page 1335

UNIVERGE SV8100
SMDR requires a connection to the CD-CP00-US LAN, or a RS232 serial connection to a

CT(A)-R adaptor on a DTH/DTR style phone.
When using a CT(A)-R unit connected to a DTH/DTR style terminal for SMDR output:

SW1-1 and SW1-2 should be set to ON and SW1-3 ~SW1-8 set to OFF on the CT(A) unit

The CT(A)-R unit should be connected to the DTH/DTR terminal and connected to power

before the line cord is plugged in
DT300 and DT700 style terminals do not support a RS232 serial connection for SMDR

output.
If no answer is received, NO ANSWER is displayed regardless of the system programing

for the Caller ID display option.
The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or

35-02-17.
When Program 35-02-18 is set to 1, the first and second lines are sometimes separated.

When the buffer is full, the overflowed data may not be shown.
The special characters used in the UNIVERGE SV8100 system cannot be output to the

SMDR – they are converted to (_).
To use the PBX Call Reporting option, program system for behind PBX operation.

Calls made from Virtual Extensions show up in SMDR as calls made from the physical

extension the VE resides on.
Default Setting
Disabled
System Availability
Terminals
All Terminals
Required Component(s)
Software License
Station Message Detail Recording
Issue 8.01
2 - 1307