NEC Univerge SV8100 Features And Specifications Manual page 1264

Issue 8.01
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-01-06 Basic Trunk Data Setup – SMDR
Printout
15-01-03 Basic Extension Data Setup –
SMDR Printout
35-01-01 SMDR Options – Output Port
Type
35-01-02 SMDR Options – Output
Destination Number
35-01-03 SMDR Options – Header
Language
35-01-04 SMDR Options – Omit Digits
2 - 1236
Description/Comments
Have the system Include (1) or
Exclude (0) the trunk you are
programming from the SMDR
printout. Refer to Program 35-01
and 35-02 for SMDR printout
options.
For each extension, enter 1 if an
extension call should appear on
the SMDR report. Enter 0 for the
extension if the calls should not
appear.
Specify the type of connection
used for SMDR. The baud rate for
the COM port should be set in
Program 15-02-19.
Specify the SMDR printer output
extension (CTA extension
number).
Specify the language used to print
the SMDR header.
The number of digits entered for
this option do not print on the
SMDR Report (0~24). For
example, if the entry is 10, the first
10 digits a user dials do not
appear on the SMDR report.
UNIVERGE SV8100
Assigned Data
0 = No Print Out
1 = Prints Out
(default = 0)
0 = Do not print on
SMDR report
1 = Include on
SMDR report
(default = 1)
0 = None
3 = LAN
4 = CTA/CTU
(default = 0)
Up to eight digits
(default not assigned)
0 = English
1 = German
2 = French
3 = Italian
4 = Spanish
(default = 0)
0~24
(0 = Not applied)
(default = 0)
SMB8000 Communications Analyst
Level
1 2 3





