NEC Univerge SV8100 Features And Specifications Manual page 1036

Issue 8.01
Program
Program Name
Number
33-02-01 ACI Department Calling Group
80-01-02 Service Tone Setup – Basic Tone
Number
2 - 1008
Description/Comments
Assign ACI software ports to an
ACI Department Group. This lets
ACI callers connect to ACI
software ports by dialing the group
pilot number (set in Program
11-08).
The following features require that
the system tones listed below be
changed to match the table. After
changing these settings the
chassis must be reset for the
changes to take effect.
Call Screening

Call Holding

Busy Greeting

Await Answer Transfer

UNIVERGE SV8100
Assigned Data
1
ACI Ports: 1~96
ACI Groups: 1~16
Default:
ACI Port/Group/Priority
01/ 1/ 1
02/ 1/ 2
: / :/ : 
96/ 1/ 96
 Refer to Analog
Communications
Interface (ACI) on
page 2-45 for
additional
information.
1~33
(0 = No Tone)
(33=Default Time Slot)
Refer to Table 2-28
Service Tone Setup,

Program 80-01-02 on
page 2-663.
Music on Hold
Level
2 3