Figure 2-29 Webpro End User Screen - NEC Univerge SV8100 Features And Specifications Manual

Issue 8.01
WebPro End User Programming
WebPro has an End User Login for which extensions can program functions for their own extension.
They can program Function keys, Virtual Extension ringing assignment, Station Speed Dial, InMail
features, Station Name, Call Forwarding, Display Language, Ring Tone and End User Password.
To login to the WebPro End User Programming, point to the IP address of the system in a web browser
like you would logging into WebPro. Use the extension number as the User Name and the password is
assigned in Program 90-28-01 (Default is 1111).
Conditions
With SV8100 Version 5000 (5.00 or higher) software and PZ-IPLB daughter board

installed, half duplex connections are not supported. For troubleshooting purposes, a
managed switch capable of port mirroring is required to capture packet data from the
SV8100 IPLB Ethernet port.
2 - 1092

Figure 2-29 WebPro End User Screen

UNIVERGE SV8100
PC Programming