NEC Univerge SV8100 Features And Specifications Manual page 1318

Issue 8.01
Program
Program Name
Number
13-10-01 Telephone Book Routing –
Outgoing Mode
15-19-01 System Telephone Book Setup
for Extension – Telephone Book
1
15-19-02 System Telephone Book Setup
for Extension – Telephone Book
2
15-19-06 System Telephone Book Setup
for Extension – Locking of
Telephone Book
15-09-07 System Telephone Book Setup
for Extension – Password
Operation
To search for an entry in the Telephone Book:
1. Press the DIR softkey.
2. Press the TELBK softkey.
3. Press the softkey associated with the first or second book.
- OR -
Press the Right cursor key.
2 - 1290
Description/Comments
Assign a trunk or ICM per
telephone book (1-100).
 If set to trunk, it follows the
stations trunk group routing
and you do not enter the
trunk access code in the
entries. If set to ICM, you
must enter the trunk access
code in front of the number
and it will follow the trunk
access code for routing.
Assign a station to the first
telephone book. A station can
have a maximum of two telephone
books assigned.
Assign a station to the second
telephone book. A station can
have a maximum of two telephone
books assigned.
Allows the book to be locked/
unlocked. When locked, the
password must be dialed to unlock
the book or it can be removed via
programming.
Allows you to lock/unlock the
telephone book per extension.
UNIVERGE SV8100
Assigned Data
1
0 = Trunk Outgoing
1 = Intercom Outgoing
(default = 0)

Up to eight digits
0~100
Default:
Port 1 : 1

Port 2 : 2
:
:
Port 100 : 100
Up to eight digits
0~100

(default = 0)
0 = Off
1 = On

(default = 0)
0000~9999 (Fixed four

digits)
(default = 0000)
Speed Dial – Telephone Book
Level
2 3