Sv8100/Sv8300 Terminals; Table 2-76 Dt700 Supported Encryption - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Enhancements
With Version 3000 or higher system software, the appropriate line key page automatically displays
for incoming calls on the DTL-8LD-1 (DESI-Less) and ITL-320C-1 terminals.
Description
The SV8100/SV8300 is a full-featured IP based communications system providing a rich feature set with
pure Voice over IP (VoIP) communications, across corporate Local and Wide Area Networks (LAN and
WAN).
The DT700 series telephones provide a converged infrastructure at the desktop, with a 10Base-T/
100Base-TX connection to the LAN and built-in hub for a PC connection to the telephone itself. The
system can provide peer-to-peer connections between the DT700 series telephones with voice
compression, offering existing IP telephone features with an enhanced user interface. On the WAN side,
the system can provide peer-to-peer connections over IP networks with the voice compression, on CCIS
over IP or Remote Unit over IP.
 Remote Unit over IP is available only for the SV8300.
The SV8100/SV8300 can provide legacy line/trunk interfaces to support the existing Time Division
Multiplexing (TDM) based infrastructure, such as analog telephones, digital telephones (DT300 series),
analog networks and digital networks (T1/E1, ISDN, etc.).
Encryption
This feature is supported with main software V 2.5 or above and terminal firmware 92.2.1.0 or above.
Source
DT700
DT700
DT700 STD SIP (Non P2P)
DT700

SV8100/SV8300 Terminals

Table 2-76 DT700 Supported Encryption

Destination
DtermIP
STD SIP (P2P)
DT700
SV8100/SV8300 Terminals
SRTP
S DT700 VoIPDB
Encrypt between DT700 and VoIPDB
N
S DT700 VoIPDB
Encrypt between DT700 and VoIPDB
S MH240 without MH240
Comment
Issue 8.01
2 - 1379