NEC Univerge SV8100 Features And Specifications Manual page 1122

Issue 8.01
You can have a maximum of four users logged into WebPro anytime.

You can have up to two phones in programming mode anytime.

You can have four WebPro users and two phone programming users logged in at the same

time for a total of six users in programming mode simultaneously. However, the two
phone programming users do not show up in session management in WebPro.
PCPro can be logged in with only one user. This is allowed only if no other users are

logged into programming mode (PCPro, WebPro, or Phone). Also, if a user is connected to
the switch via PCPro, no other user can log in through PCPro, WebPro, or Phone
Programming.
Only one PCPro/WebPro/Handset can be programming the switch anytime.

When programming via WebPro/PCPro, some data requires you to logout before the switch

fully applies the changes. These Programs are: 10-21-2, 11-02 (for directory dial), 11-04
(for directory dial), 13-04 (for directory dial), 14-04, 15-05, 15-15, 16-02, 23-02, 31-02,
41-02, 41-17, 47-02, 47-03, 82-11 and 83-11.
In the card configuration window, if you click a card type in the main menu, the menu

closes. You must mouse over the card type to open the submenu to list all cards of that
type.
To access the modem over K-CCIS, route the modem access service code to the target

switch. Do not call a station that is call forwarded to the service code. When accessing the
modem over K-CCIS, enter the service code to be dialed in PC Pro.
PC Pro follows the PC dialing properties. If dialing a service code, you must turn off the dial 9 for

outside line and area code inclusion or PC Pro will dial these digits as well.
Some program items require second initialization of the KTS before they take effect. These

Programs are: 10-12-01, 10-12-02, 10-12-03, 10-12-04, 10-13-01, 10-13-02, 10-13-03,
10-14, 10-15, 10-16-01, 10-16-02, 10-16-03, 10-16-04, 20-01-03, 47-01-01, 80-01,
80-02-01, 80-02-02, 80-02-03, 80-02-04, 80-03, 80-04, 84-03-01, 84-03-02, 84-03-06,
84-03-07, 84-03-08, 84-05-01, 84-05-02, 84-06-01, 84-06-02, 84-06-03, 84-06-04,
84-06-05, 84-06-06, 84-06-07, 84-06-08, 84-06-09, 84-06-10, 84-06-11, 84-09 and 84-10.
2 - 1094
UNIVERGE SV8100
PC Programming