NEC Univerge SV8100 Features And Specifications Manual page 1251

UNIVERGE SV8100
Program
Program Name
Number
20-11-18 Class of Service Options (Hold/
Transfer Service) – No Recall
20-11-19 Class of Service Options (Hold/
Transfer Service) – Hold/
Extended Park
20-11-20 Class of Service Options (Hold/
Transfer Service) – No Callback
20-11-21 Class of Service Options (Hold/
Transfer Service) – Restriction
for Tandem Trunking on Hang
Up
20-11-22 Class of Service Options (Hold/
Transfer Service) – Restricted
Unsupervised Conference
20-11-23 Class of Service Options (Hold/
Transfer Service) – CAR/VE Call
Forward Set/Cancel
20-11-24 Class of Service Options (Hold/
Transfer Service) – Trunk Park
Hold Mode
20-11-25 Class of Service Options (Hold/
Transfer Service) – Transfer Park
Call
20-12-02 Class of Service Options
(Charging Cost Service) –
Advice of Charge
20-12-03 Class of Service Options
(Charging Cost Service) – Cost
Display (TTU)
SLT Adapter
Description/Comments
No Recall set to 1 does not stop
transferred calls from recalling
from a virtual extension.
Determine whether an extension
Class of Service should allow
either normal or extended Park.
Turn Off or On an extension ability
to receive Callbacks.
Allow/Deny an extension user
ability to set up a tandem/
conference call automatically
when they hang up.
Allow/Deny an extension user
ability to initiate an unsupervised
conference.
Turn Off or On an extension user
ability to set or cancel Call
Forwarding for a Virtual Extension.
Set the hold type when a trunk call
is put on hold by an extension.
Turn Off or On an extension user
ability to transfer a parked call.
ISDN-AOC
Turn Off or On a DISA or tie trunk
caller ability to dial 9 for Trunk
Group Routing or Automatic Route
Selection.
ISDN billing information.
Assigned Data
1
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for COS
1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold
(On)
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
0 = Off
1 = On
(default = 0 for
COS 1~15)
0 = Off
1 = On
(default = 1 for
COS 1~15)
Issue 8.01
Level
2 3










2 - 1223