NEC Univerge SV8100 Features And Specifications Manual page 1138

Issue 8.01
Required Component(s)
None
Related Features
Central Office Calls, Placing
Direct Inward Dialing (DID)
Direct Inward Line (DIL)
Direct Inward System Access (DISA)
Line Preference
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
14-05-01 Trunk Group – Trunk Group
Number
2 - 1110
Description/Comments
Assign Prime Line to a separate
trunk group for outgoing Prime
Line selection. (Also refer to
Program 14-06 and Program
21-02.)
UNIVERGE SV8100
Assigned Data
1
Trunk Group Number:
0~100 Priority Number:

1~200 (default = Trunk
Group 1, with priority in
ascending order.)
Prime Line Selection
Level
2 3