NEC Univerge SV8100 Features And Specifications Manual page 1310

Issue 8.01
To dial a System Speed Dialing number:
1. Go off-hook.
2. Press Redial.
- OR -
Press the Right Cursor key until the Group Speed Dial menu appears.
3. Dial the System Speed Dialing storage code.
Unless you preselect, Trunk Group Routing selects the trunk for the call. The system may optionally select a

specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a stored number.

To store a System Speed Dialing number under a Programmable Function Key:
1. At multiline terminal, press Speaker.
2. Dial 751.
3. Press the key where the number is to be stored.
4. Dial 27.
5. Dial System Speed Dial Bin number to put under the key.
6. Press Speaker to hang up.
To dial a System Speed Dialing number under a Programmable Function Key:
1. At the multiline terminal, press Speaker.
2. Press the key, which has the stored number to be dialed.
The number seizes an outside line and dials out.

To dial a Group Speed Dialing number:
1. Go off-hook.
2. Press Redial.
- OR -
Press the Right Cursor key until the Group Speed Dial menu appears.
- OR -
Press the Group Speed Dialing key (Program 15-07-01 or SC 751: 28).
To preselect, press a line key in step 1 (instead of Speaker) before pressing Redial or Speed Dialing key.

2 - 1282
UNIVERGE SV8100
Speed Dial – System/Group/Station