Resident System Program - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

When power is supplied to the system, the hardware configuration is scanned and Resident System

Program default values are assigned including terminal types (e.g. PGD(2)-U10 ADP, DSS Console).

This enables immediate operation, even before the system is programmed to accommodate the

individual site requirements.

Default assignments for multiline terminals are: LK 01~LK 08 corresponds to

CO 01~CO 08.

DSS Console to Extension assignments for Attendant Add-On Consoles are not assigned.

Default Attendant Add-On Console key assignments are:

DSS Keys = 001~060

Stations = 101~160

First Initialization of the system returns all programming values to default. Without a

PC-ATA Compact Flash card installed, press and hold the SW1 (Load Switch) and toggle

the Reset (SW2) switch. Continue to hold the SW1 switch for approximately 5~10 seconds

before releasing. The system boots loading Resident System Programming.

Default Setting

System Availability

Required Component(s)

Resident System Program

Show Quick Links

Table of Contents