NEC Univerge SV8100 Features And Specifications Manual page 1073

UNIVERGE SV8100
Program
Program Name
Number
15-03-03 Single Line Telephone Basic Data
Setup – Terminal Type
15-03-05 Single Line Telephone Basic
Data Setup – Trunk Polarity
Reverse
15-03-06 Single Line Telephone Basic
Data Setup – Extension Polarity
Reverse
15-03-07 Single Line Telephone Basic
Data Setup – Enabled On-Hook
When Holding (SLT)
15-03-08 Single Line Telephone Basic
Data Setup – Answer On-Hook
when Holding (SLT)
15-03-09 Single Line Telephone Basic
Data Setup – Caller ID Function -
For External Module
15-03-10 Single Line Telephone Basic
Data Setup – Caller ID Name
15-03-11 Single Line Telephone Basic
Data Setup – Caller ID Type
15-03-14 Single Line Telephone Basic
Data Setup – Forwarded Caller ID
Display Mode
(OPX) Off-Premise Extension
Description/Comments
Enter 1 for this option to allow a
single line port to receive DTMF
tones after the initial call setup.
Enter 0 to have the port ignore
DTMF tones after the initial call
setup. For Voice Mail, always
enter 1 (e.g., receive DTMF
tones).
-- Not Used in U.S. -- Do Not
Change Default Entry as DTMF
issues may arise with voice mail.
-- Not Used in U.S. -- Do Not
Change Default Entry as DTMF
issues may arise with voice mail.
Enable/Disable this program.
Enable/Disable Answer on-hook
when Holding for SLT.
Enable/Disable the Caller ID FSK
signal for an external Caller ID
module or a 3rd-Party vendor
telephone with Caller ID display.
Important:
If voice mail is used, this setting
must be disabled for the system
integration codes to be correct.
With a 2500 set (no Caller ID)

installed, this must be set to 0
for incoming callers to have a
talk path.
Determine if an extension user
telephone should display the
Caller ID name.
Select whether the Caller ID type
is FSK or DTMF.
Determine what the display shows
when a multiline terminal receives
a forwarded outside call.
Assigned Data
1
0 = Normal
1 = Special
(default = 0)
0 = Off
1 = On
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = No
1 = Yes
(default = 1)
0 = Disable
(No)
1 = Enable
(Yes)
(default = 1)
0 = Disable
1 = Enable
(default = 0)
0 = Disable
1 = Enable
(default = 1)
0 = FSK
1 = DTMF
(default = 0)
0 = Calling Extension
Number (Calling)
1 = External Caller ID
(Forward)
(default = 0)
Issue 8.01
Level
2 3









2 - 1045