NEC Univerge SV8100 Features And Specifications Manual page 1395

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

UNIVERGE SV8100
Program
Program Name
Number
51-13-02
NetLink Options– Time Zone
Option
51-13-03
NetLink Options– MAC Address
Authorization Enable
51-14-01
NetLink System Control – Delete
System Information
51-15-01
Demonstration Setting
51-16-01
NetLink System Data Replication
Mode Setting – System Data
Replication Mode
51-16-02
NetLink System Data Replication
Mode Setting – System Data
Replication Time Setting
51-16-03
NetLink System Data Replication
Mode Setting – System Data
Replication Interval Setting
51-16-04
Replication Time Stamp
Show next replication time.
(Read Only)
SV8100 NetLink
Description/Comments
When set to 0, the following
features are affected: Clock
Display, Incoming/Outgoing
History List.
When set to 1, the following
features are affected: VRS Time
Announce, Date and Time Setting
Service Code, Alarm Clock
setting.
Refer to Program 51-02-04 for
setting MAC address.
Delete system information and the
slot information. The system must
be disconnected.
Automatically set the minimum
setting values in NetLink. A
system reset occurs after this
command is executed.
(This program is available
only via telephone
programming and not
through PC Programming).
Set the synchronous mode of the
system data. When set to 1 , the
systems are synchronized at the
time set in Item 02 below.
When set to 2, the systems are
synchronized at regular time
intervals set in Item 03 below.
Set the time of day that both
systems synchronize database
(when Item 01 is set to 1).
Set the time that both systems
synchronize database (when Item
01 is set to 2).
Month: 0~12
Day: 0~31
Hour: 00~23
Minute: 00~59.
Assigned Data
1
0 = Disable (Off)
1 = Enable (On)
(default = 0)
0 = Disable (Off)
1 = Enable (On)
(default = 0)
1~50
(default = 1)
1 = Primary automatic
setting
2 = Secondary 1 -
automatic operation
setting
3 = Secondary 2 -
automatic operation
setting
4 = Secondary 3 -
automatic operation
setting
0 = Disable
1 = Setting Time Mode
2 = Interval Mode
(default = 2)
0000~2359
(default = 0000)
15~1440 (minutes)
(default = 30)
(default not assigned)
Issue 8.01
Level
2
3
2 - 1367

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents