NEC Univerge SV8100 Features And Specifications Manual page 1121

UNIVERGE SV8100
When connecting via a dial up connection, a Dial Up Connection (PPP) must be configured

in Windows Network Connections.
When uploading via a Dial Up connection, uploading card configuration (Hardware Upload)

is not supported.
The hardware/software requirements for the host PC running the PCPro application are:

CPU
Memory
Operating System (OS)
Other
Communication Port
Disk Space
TCP Port
Screen Resolution
The hardware/software requirements for the host PC running WebPro are:

Browser
Network
Screen Resolution
PC Programming
Item
Pentium
Pentium 4 2.5GHz (recommended)
128MB of RAM, 256MB (recommended)
MS Windows 2000
Windows XP or Microsoft Vista
Windows 7 (32- and 64-bit)
Microsoft Internet Explorer 6.0 or higher
LAN, or Modem
35MB for PCPro (minimum)
TCP port 8000 must be open between the
terminal and the host PC for uploading/
downloading via LAN. PCPro/WebPro TCP port is
set for 8000 at default, but can be changed via
WebPro using Program 90-38-02. Program
90-38-02 is not accessible from Phone
Programming or PCPro. TCP port 5963 is
required to be open if the Debug Terminal is going
to be used.
800 x 600 (minimum)
1024 x 760 (recommended)
Item
MS Internet Explorer 6.0 (or higher)
Mozilla
IP connection to the KTS
800 x 600 (minimum)
1024 x 760 (recommended)
Requirement
®
III 598MHz (minimum)
Requirement
® ®
Firefox 1.0.3 (or higher)
Issue 8.01
2 - 1093