NEC Univerge SV8100 Features And Specifications Manual page 1139

UNIVERGE SV8100
Program
Program Name
Number
14-06-01 Trunk Group Routing – Priority
Order Number
14-07-01 Trunk Access Map Setup – Trunk
Port Number
15-01-02 Basic Extension Data Setup –
Outgoing Trunk Line Preference
Prime Line Selection
Description/Comments
Set the priority order number 1~4.
For outgoing Prime Line selection,
assign each Prime Line trunk to a
different Access Map and deny
outbound access to all trunks
except the Prime Line trunk.
Turn Off or On Outgoing Trunk
Line Preference for extensions.
Assigned Data
1
0 = Not Specify
1~100 : (Trunk Group
Number)
1001~1100 : (1000 +
Route Table Number)
Default:
Route 1, Order

Number 1 = 1 (Trunk
Group 1)
Order Numbers 2, 3, 4
= 0 (Not Specified)
All Other Routes
(2~100) and Order
Numbers (1~4) = 0
(Not Specified)
0 = No access
1 = Outgoing access
only
2 = Incoming access
only
3 = Access only when
trunk on Hold
4 = Outgoing access
and access when trunk
on Hold
5 = Incoming access
and access when trunk
on Hold
6 = Incoming and

Outgoing access
7 = Incoming access,
outgoing access and
access when trunk
on Hold
Trunk Access Maps:
1~200
Default:
Access Maps 1~200 =
Trunk Ports 1~200
assigned with option 7
access (incoming and
outgoing access and
access when trunk is
on Hold)
0 = Off

1 = On
(default = 0)
Issue 8.01
Level
2 3
2 - 1111