NEC Univerge SV8100 Features And Specifications Manual page 1296

Issue 8.01 UNIVERGE SV8100
DSS Console Chaining
DSS Console chaining allows an extension user with a DSS Console to chain to a Speed Dialing number
stored under a DSS Console key. The stored number dials out (chains) to the initial call. This can, for
example, simplify dialing when calling a company with an Automated Attendant. You can program the
bin for the company number under one DSS Console key (e.g., 200) and the client's extension number
#
under the other (e.g., 201). The DSS Console user can press the first key to call the company, wait for
#
the Automated Attendant to answer, then press the second key to call the client (extension 400). See the
Programming section below for additional details.
The DSS Console user can also chain to an Speed Dialing number dialed manually, from a
Programmable Function Key or a One-Touch Key.
Storing a Flash
To enhance compatibility with connected Centrex and PBX lines, Speed Dialing bin can have a stored
Flash command. For example, storing 9 Flash 926 5400 causes the system to dial 9, flash the line and
then dial 926 5400. The Flash can be stored by the user from their telephone or by the system
administrator during system programming.
Using a Programmable Function Key
To streamline frequently-called numbers, a Speed Dialing Programmable Function Key can also store a
Speed Dialing bin number. When the extension user presses the key, the telephone automatically dials
out the stored number. This provides true one-touch calling via a telephone function keys.
Cursor Key Operation
By pressing the Right Cursor key, the user can access all directory menus. The flow chart below shows
the menu access sequence (refer to Figure 2-31 Right Cursor Key Operation Flow Chart on page
2-1269). If the terminal is not allowed access to Speed Dial and/or Telephone Book numbers or no
telephone numbers are programmed in those areas, they are skipped.
2 - 1268 Speed Dial – System/Group/Station