NEC Univerge SV8100 Features And Specifications Manual page 1102

Issue 8.01
Required Component(s)
None
Related Features
Caller ID
Call Arrival (CAR) Keys
Direct Station Selection (DSS) Console
Hold
Programmable Function Keys
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-31 Service Code Setup (for Service
Access) – Park Hold
11-12-32 Service Code Setup (for Service
Access) – Answer for Park Hold
11-12-35 Service Code Setup (for Service
Access) – Station Park Hold
11-16-11 Single Digit Service Code Setup
– Station Park Hold
2 - 1074
Description/Comments
Set the service code used for
placing a call in Park.
Set the service code used for
answering a call in Park.
Set the service code used for
placing a call in a Personal Park.
Customize the one-digit service
code used when placing a call in
Personal Park.
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
#
(default: 6)
MLT, SLT
(default: 6)
MLT, SLT
(default = 757)
(default not assigned)
Level
2 3




Park