Figure 2-34 Sv8100 Encryption Configuration - NEC Univerge SV8100 Features And Specifications Manual

Issue 8.01
Source
DT700
DT700
DT700
Encryption On
S = Supported
N = Not Supported
 SV8100 supports AES 128 bit encryption. Program 10-46-08 Mode1 (read only) represents AES 128 bit.
Conditions
In Version 3000 or higher software the system can be programmed to blink the page

number of a DT300/DT700 DESI-Less terminal when it receives an incoming call, or switch
to the page the incoming call is on. Furthermore, a default page can be defined for the
DESI-Less terminal to change to when it goes idle or when it has answered a call.
DT300/DT700 terminals installed in a SV8100 with the IPK/IPK II Migration system do not

support the DESI-Less page switching and blinking.
2 - 1380
Table 2-76 DT700 Supported Encryption (Continued)
Destination
PSTN
IP Network
(SIP/H323/CCIS
DT700
Encryption Off

Figure 2-34 SV8100 Encryption Configuration

SRTP
S DT700 VoIPDB
Encrypt between DT700 and VoIPDB
S DT700 VoIPDB
Encrypt between DT700 and VoIPDB
N
UNIVERGE SV8100
Comment
SV8100/SV8300 Terminals