A/C Evaporator Thermistor (A/C Evaporator Temperature Sensor); Expansion Valve - Suzuki Jimny Service Manual

A/C Evaporator Thermistor (A/C Evaporator
Temperature Sensor)
INSPECTION
Check resistance between terminals for A/C evaporator ther-
mistor (1).
If check results are as not specified, replace thermistor.
A/C evaporator temperature sensor resistance
Sensor Temperature (°C (°F))
0 (32)
25 (77)
NOTE:
When A/C evaporator thermistor (1) removed, its should
be reinstalled in original position.

Expansion Valve

INSPECTION
Refer to "Performance Diagnosis" in this section.
REMOVAL
1) Disconnect negative (–) cable at battery.
2) Recover refrigerant from A/C system by referring to
"Recover" in this section.
NOTE:
The amount of removed compressor oil must be mea-
sured for replenishing compressor oil.
3) Remove attaching bolt (1).
4) Remove suction hose (2) and receiver dryer outlet pipe (3)
from expansion valve (4).
5) Remove expansion valve (4).
AIR CONDITIONING (OPTIONAL) 1B-37
Resistance (kΩ)
6.4 – 7.0
1.8 – 2.2