3) Drain engine coolant and disconnect heater hoses (1) from
heater unit.
4) Disable air bag system referring to "Disabling Air Bag Sys-
tem" in Section 10B (if equipped).
5) Remove attaching bolt (1).
6) Disconnect suction hose (2) and receiver / dryer outlet pipe
(3) from expansion valve (4).
7) Remove instrument panel referring to "Instrument Panel" in
Section 9.
8) Remove cooling unit (1) with heater unit (2) from vehicle
body.
9) Remove cooling unit (1) from heater unit (2).
INSPECTION
Check the following.
• Check clog of A/C evaporator fins.
If any clogs are found, A/C evaporator fins should be
washed with water, and should be dried with compressed
air.
• Check A/C evaporator fins for leakage and breakage.
If any defects are found, repair or replace A/C evaporator.
• Check A/C evaporator fittings for leakage.
If any defects are found, repair or replace A/C evaporator.
AIR CONDITIONING (OPTIONAL) 1B-35