Suzuki Jimny Service Manual page 532

19) Remove exhaust manifold stiffener (1).
20) Loosen cylinder head bolts in such order as indicated in fig-
ure by using a 12 corner socket wrenches and remove them.
NOTE:
Don't forget to remove bolt (M8) (1) as shown in figure.
21) Check all around cylinder head for any other parts required
to be removed or disconnected and remove or disconnect
whatever necessary.
22) Remove cylinder head with intake manifold and exhaust
manifold. Use lifting device, if necessary.
ENGINE MECHANICAL (M13 ENGINE) 6A1-51