Brake Disc - Suzuki Jimny Service Manual

5-26 BRAKES
3) Install brake flexible hose (4) as shown and torque hose
mounting bolt (3) to specification.
Tightening torque
Front brake flexible hose bolt
(a) : 23 N·m (2.3 kg-m, 17.0 lb-ft)
4) Install wheel and torque wheel nuts to specification.
5) After completing installation, fill reservoir with brake fluid and
bleed brake system. Perform brake test and check each
installed part for oil leakage.
1. Brake caliper
2. Washer

Brake Disc

REMOVAL
1) Hoist vehicle and remove wheel.
2) Remove caliper assembly by loosening carrier bolts (2 pcs).
CAUTION:
During removal, be careful not to damage brake flexible
hose and not to depress brake pedal.
3) Pull brake disc off by using 8 mm bolts (1) (2 pcs).