Suzuki Jimny Service Manual page 351

5E-34 ANTILOCK BRAKE SYSTEM (ABS)
SENSOR RING INSPECTION
• Check ring teeth for being missing, damaged or deformed.
• Turn drive shaft and check if ring rotation is free from eccen-
tricity and looseness.
• Check that no foreign material is attached.
If any faulty is found, repair or replace.
INSTALLATION
1) Check that no foreign material is attached to sensor (1) and
ring.
2) Install it by reversing removal procedure.
Tightening torque
Front wheel speed sensor bolt and front wheel speed sen-
sor harness clamp bolts
(a) : 10 N·m (1.0 kg-m, 7.2 lb-ft)
3) Check that there is no clearance between sensor and
knuckle.
CAUTION:
Do not pull wire harness or twist more than necessary
when installing front wheel speed sensor.
2. Bolt