Suzuki Jimny Service Manual page 104

4) Remove circlip (1) using special tool.
Special tool
(A) : 09900-06107
5) Remove magnet clutch lead wire clamp screw, and discon-
nect magnet clutch lead wire.
6) Remove magnet clutch pulley (1) by using a puller (2).
NOTE:
• Be careful not to damage pulley part.
7) Remove snap ring (1) using special tool.
Special tool
(A) : 09900-06107
8) Remove magnet clutch coil (2) from compressor body
assembly (3).
INSTALLATION
1) Install magnet clutch coil (1).
NOTE:
• Protrusion on under side of magnet clutch coil (1) must
match hole in compressor body assembly (2).
2) Install snap ring (3) to proper direction as show using special
tool.
Special tool
(A) : 09900-06107
AIR CONDITIONING (OPTIONAL) 1B-43