Suzuki Jimny Service Manual page 375

6-18 ENGINE GENERAL INFORMATION AND DIAGNOSIS
DTC NO.
P0702 Transmission Control System Electrical
P0705 Temperature Sensor Circuit Malfunction
Transmission Temperature Sensor Circuit Mal-
P0710
function
Input / Turbine Speed Sensor Circuit Malfunc-
P0715
tion
Output Shaft Speed Sensor Circuit Malfunc-
P0720
tion
P0725 Engine Speed Input Circuit Malfunction
P0730 Incorrect Gear Ratio
P0743 Torque Converter Clutch Circuit Electrical
P0753 Shift Solenoid A Electrical
P0758 Shift Solenoid B Electrical
P0763 Shift Solenoid C Electrical
P0768 Shift Solenoid D Electrical
P1700 Throttle Position Signal Input Malfunction
Internal Control Module Memory Check Some
P1702
Error
Engine Coolant Temperature Signal Input
P1709
Malfunction
P1887 Transfer Signal
P1620
ECU code not registered
(No.84)
P1621 No ECU code transmitted from Immobilizer
(No.83) Control Module
P1622
Faulty in ECM
(No.82)
P1623
ECU code not matched
(No.81)
NOTE:
• For ( ) marked No. in DTC column, it is used for vehicle without Immobilizer indicator lamp.
• DTC No.12 appears when none of the other codes is identified (vehicle without Immobilizer indica-
tor lamp).
DETECTING ITEM DETECTING CONDITION
(DTC will set when detecting :)
Refer to Section 7B.
These DTCs can not be read on vehicle without
Immobilizer indicator lamp (by ECM application of
SUZUKI scan tool).
Refer to Section 8G.
MIL