1B-36 AIR CONDITIONING (OPTIONAL)
INSTALLATION
Reverse removal procedure to install cooling unit, and then noting
the following instructions.
• If A/C evaporator thermistor removed, its should be rein-
stalled in original position.
• Install uniformly the packing (1) to installation hole.
• Replenish specified amount of compressor oil to compressor
suction side by referring to "Replenishing Compressor Oil" in
this section.
• Evacuate and charge refrigerant by referring to "Evacuating"
and "Charging" in this section.
• Adjust mode control cable, temperature control cable and
fresh air control cable by referring to "Heater Control Lever
Assembly" in Section 1A.
• Enable air bag system referring to "Enable Air Bag System"
in Section 10B. (if equipped)
• Fill engine coolant to radiator, referring to "Cooling System
Flush and Refill" in Section 6B.