Suzuki Jimny Service Manual page 573

6A1-92 ENGINE MECHANICAL (M13 ENGINE)
8) Install rear oil seal housing (1) and tighten bolts to specified
torque by using special tool.
Special tool
(A) : 09911-97720
Tightening torque
Rear oil seal housing bolts : 11 N·m (1.1 kg-m, 8.0 lb-ft)
A : Crankshaft side
9) Install flywheel (drive plate for A/T).
Using special tool, lock flywheel or drive plate, and tighten
flywheel or drive plate bolts applied with sealant to specifica-
tion.
"A" : Sealant 1215 99000-31110
Special tool
(A) : 09924-17810
Tightening torque
Flywheel or drive plate bolts
(a) : 70 N·m (7.0 kg-m, 51.0 lb-ft)
10) Install the following parts to engine as previously outlined.
• Piston and connecting rod
• Cylinder head assembly
• Camshaft, tappet and shim
• Timing chain guide, chain tensioner adjuster, chain ten-
sioner, timing chain and crankshaft timing sprocket
• Timing chain cover
• Cylinder head cover
• Intake manifold and exhaust manifold
• Oil pan and oil pump strainer
11) Install clutch to flywheel (vehicle with M/T) referring to
"Clutch Cover, Clutch Disc, Flywheel and Release Bearing"
in Section 7C.
12) Install engine assembly to vehicle referring to "Engine
Assembly" in this section.