Water Pump; Thermostat; Cooling Fan Clutch; Coolant (Water) Temperature Gauge - Suzuki Jimny Service Manual

Jimny suzuki

Hide thumbs Also See for Jimny:

Table of Contents

6B-4 ENGINE COOLING

Water Pump

The centrifugal type water pump is used in the cooling system.

The pump impeller is supported by a totally sealed bearing.

The water pump can not be disassembled.

A wax pellet type thermostat is used in the cooling system.

The temperature at which the valve begins to open is stamped on

In the top portion of the thermostat, an air bleed valve (1) is pro-

vided; this valve is for venting out the gas or air, if any, that is

accumulated in the circuit.

Fluid is enclosed in the cooling fan clutch (2) and at its center

front, there is a bimetal (3) whose thermal reaction and the engine

speed control the cooling fan speed.

Do not disassemble clutch assembly.

Keep hands, tools, and clothing away from engine cool-

ing fan (1) to help prevent personal injury.

A water temp. gauge is located at intake manifold.

This gauge activates a temp. meter in the instrument cluster.

When installing, wind sealing tape on gauge thread and tighten it.

Table of Contents