Suzuki Jimny Service Manual page 216

17) Tighten lateral rod (1) mounting bolt and nut to specified
torque.
NOTE:
When tightening bolt and nut, be sure that vehicle is off
hoist and in non loaded condition.
Tightening torque
Lateral rod bolt and nut
(a) : 90 N·m (9.0 kg-m, 65.0 lb-ft)
18) Tighten right and left shock absorber lower mounting nuts
and leading arm mounting nuts to specified torque.
NOTE:
When tightening these nuts, be sure that vehicle is off
hoist and in non loaded condition.
Tightening torque
Shock absorber lower nuts and leading arm nuts
(a) : 90 N·m (9.0 kg-m, 65.0 lb-ft)
1. Shock absorber
2. Leading arm
19) Refill front axle (differential) housing with new specified gear
oil. Refer to "Maintenance Service" in Section 7E for refill.
20) Confirm front end (wheel) alignment referring to "Preliminary
Checks Prior to Adjusting Front Alignment" in Section 3A.
FRONT SUSPENSION 3D-43