6C-8 ENGINE FUEL
"A" : Apply oil
1. Bracket sub assembly (including fuel filter)
2. Grommet
3. Tube
INSPECTION
Check fuel pump assembly for damage.
Check fuel suction filter (1) for evidence of dirt and contamination.
If present, replace or clean and check for presence of dirt in fuel
tank.
For inspection of fuel pump itself, refer to "Table B – 3 Fuel Pres-
sure Check" in Section 6.
For inspection of fuel level gauge, refer to "Fuel Meter / Fuel
Gauge Unit" in Section 8.
2. Fuel filter & bracket assembly
3. Fuel pump motor & level gauge assembly
DISASSEMBLY / REASSEMBLY
4. Housing
5. Lead wire
6. Fuel level gauge
7. Fuel pump
8. Cushion
9. Bracket
10. Spacer