Leading Arm / Bushing - Suzuki Jimny Service Manual

3D-36 FRONT SUSPENSION

Leading Arm / Bushing

REMOVAL
1) Hoist vehicle.
2) Remove air locking hub vacuum pipe clamp bolts (2) (for
4WD).
1. Leading arm (right side)
3) Support front axle housing by using floor jack.
4) Remove shock absorber lower mounting bolt, refer to "Front
Shock Absorber" in this section.
5) Remove mounting bolts and leading arm (1).
6) Remove bushings by using hydraulic press and special
tools.
Special tool
(A) : 09924-74510
(B) : 09951-16030
(C) : 09951-26010