Suzuki Jimny Service Manual page 497

6A1-16 ENGINE MECHANICAL (M13 ENGINE)
INSTALLATION
1) Install new spark plug hole gaskets (1) and new cylinder
head cover gasket (2) to cylinder head cover (3) as shown in
figure.
NOTE:
Be sure to check each of these parts for deterioration or
any damage before installation and replace if found
defective.
2) Remove oil, old sealant, and dust from sealing surface on
cylinder head and cover. After cleaning, apply sealant "A" to
the following point.
• Cylinder head gasket (1) sealing surface area (2) as shown.
"A" : Sealant 99000-31150
• Timing chain cover (1) and cylinder head (2) matching sur-
face as shown.
"A" : Sealant 99000-31150