Suzuki Jimny Service Manual page 16

• When connecting connectors, also hold connectors and
push them together until they lock securely (a click is
heard).
• When installing the wiring harness, fix it with clamps so
that no slack is left.
• When installing vehicle parts, be careful so that the wir-
ing harness is not interfered with or caught by any other
part.
• To avoid damage to the harness, protect its part which
may contact against a part forming a sharp angle by
winding tape or the like around it.
• Be careful not to touch the electrical terminals of parts
which use microcomputers (e.g. electronic control unit
like as ECM, PCM, P/S controller, etc.). The static elec-
tricity from your body can damage these parts.
GENERAL INFORMATION 0A-11