Suzuki Jimny Service Manual page 195

3D-22 FRONT SUSPENSION
4) Remove brake disc.
NOTE:
If brake disc can not be removed by hand, using 8 mm
bolts.
5) Remove front wheel bearing lock nut as follows.
For 2WD model :
a) Remove hub cap.
b) Remove front wheel bearing lock plate (1) by loosening 4
screws (2).
For 4WD model :
a) Remove air locking hub assembly (1).
b) Remove front axle shaft circlip and wheel spindle thrust
washer.
c) Uncaulk front wheel bearing lock nut.
1. Wheel hub