Oil Pan And Oil Pump Strainer - Suzuki Jimny Service Manual

6A1-24 ENGINE MECHANICAL (M13 ENGINE)

Oil Pan and Oil Pump Strainer

[A] : Sealant application amount
"a" : 3 mm (0.12 in.)
"b" : 2 mm (0.08 in.)
1. Oil pan
: Apply sealant 99000-31150 to mating surface.
2. Strainer
3. O-ring
4. Gasket
5. Drain plug
6. Strainer bolt
7. Bracket bolt
REMOVAL
1) Remove oil level gauge.
2) Remove air cleaner outlet No.1 (1) and No.2 (2) hoses and
breather hose (3).
3) To facilitate and ensure removal of oil pan, increase clear-
ance between engine and vehicle body according to the fol-
lowing procedure.
a) Install support device (1).
b) Loosen engine mounting bracket bolts (2), but do not
remove them.
c) Hoist engine 10 – 15 mm (0.4 – 0.6 in.).
CAUTION:
Do not hoist engine more than instructed above. That
may cause trouble to engine or transmission.
8. Oil pan nut
9. Oil pan bolt
Tightening torque
Do not reuse.