Lip Type Seal - Suzuki Jimny Service Manual

Lip Type Seal

REMOVAL
1) Remove magnet clutch referring to "Magnet Clutch" in this
section.
2) Remove front head mounting bolts (10 pcs).
1. Front head
3) Remove front head (1) by pushing compressor shaft (2).
NOTE:
Be careful not to remove cylinder (3) from compressor
body assembly (4).
4) Remove O-ring (5).
5) Remove lip type seal from front head (1) using bearing
remover (2).
INSTALLATION
1) Press-fit lip type seal (1) into front head (2) using special
tool.
Special tool
(A) : 09991-06050
CAUTION:
Do not reuse lip seal (1) once removed from compressor.
AIR CONDITIONING (OPTIONAL) 1B-45