1
2
10) Apply engine oil to timing chain and then turn crankshaft
clockwise by 2 revolutions and check that match marks (1)
on intake and exhaust camshaft timing sprockets are in
match with notches (2) on cylinder head and key (3) is on
upside of crankshaft as shown in figure.
1
If each mark of timing chain and each match mark are no
matches, adjust each sprocket and timing chain.
3
11) Install timing chain cover referring to "Timing Chain Cover" in
this section.
12) Perform Steps 3) to 8) of "INSTALLATION" of "Timing Chain
Cover" in this section.
ENGINE MECHANICAL (M13 ENGINE) 6A1-41