7) Remove lower and upper kingpins (1).
NOTE:
Upper and lower kingpins (1), when removed, must be
marked off one from the other.
8) Remove steering knuckle (1).
NOTE:
• When steering knuckle (1) is pulled, lower kingpin
bearing sometimes falls off. So remove bearing while
pulling off the knuckle gradually.
• Upper and lower kingpin bearings must be also
marked off one from the other.
9) Remove knuckle seal cover (1), knuckle seal (2) and knuckle
seal retainer (3) from front axle housing (4).
10) Remove spindle oil seal by using special tool.
Special tool
(A) : 09913-50121
1. Wheel spindle
11) Remove spindle bushing by using special tools.
Special tool
(A) : 09917-88210
(B) : 09916-58210
FRONT SUSPENSION 3D-29