Suzuki Jimny Service Manual page 665

6G-6 CRANKING SYSTEM
DISASSEMBLY AND REASSEMBLY
NOTE:
• Make sure to apply grease before assembly, where are indicated "A" in the figure below.
• Spare parts have been lubricated.
1. Front housing
2. Bush
3. Snap ring
4. Pinion stop ring
5. Pinion gear 10. Seal rubber
6. Over-running clutch 11. Magnetic switch
7. Lever 12. Ball
8. Plunger 13. Internal gear
9. Plate 14. Planetary carrier shaft
15. Planetary gear
16. Packing 21. Rear bracket
17. Yoke 22. Rear bush
18. Armature 23. Brush spring
19. Brush
20. Brush holder
Apply grease (99000-25010)
Do not reuse.