Electronic Control System; Engine Control Module (Ecm); Manifold Absolute Pressure Sensor (Map Sensor) - Suzuki Jimny Service Manual

Electronic Control System

Engine control module (ECM)

CAUTION:
As ECM consists of precision parts, be careful not to
expose it to excessive shock.
REMOVAL
1) Disconnect battery negative cable at battery.
2) Disable air bag system, refer to "Disabling Air Bag System"
in Section 10B if equipped.
3) Remove glove box.
4) Disconnect ECM (1) and TCM (3) (if equipped) connectors.
5) Loosen 2 nuts (2) and remove ECM and TCM (if equipped).
INSTALLATION
1) Reverse removal procedure noting the following:
• Connect connectors to ECM and TCM (if equipped)
securely.

Manifold absolute pressure sensor (MAP sensor)

INSPECTION
Check MAP sensor referring to "MAP Sensor Individual Check" in
DTC P0105 (No.11) Flow Table of Section 6. If malfunction is
found, replace.
ENGINE AND EMISSION CONTROL SYSTEM 6E-29